Author |
Win2k DX 8.1 nvidia 21.83 |
Deleted
Joined: Posts: 0
| Posted: 2001-11-22 11:26  
I've got:
Pentium III/700
512 MB ram
Win2k w/sp2
DirectX 8.1
GeForce2 pro
Nvidia reference 21.83 driver
It all worked fine with DirectX 8.0
When I start DS I get:
Failed to initialize display!
Failed to initialize the platform; please run ClientSetup to check your client settings.
In dxdiag I get:
No problems found.
DirectDraw test results: All tests were successful.
Direct3D test results: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available)
The dx 7 interface test goes fine, but the dx 8 interface test fails.
Anybody seen this before?
HELP!!
refrus
_________________
|
Bumblebee Cadet Mercenaries of Andosia
Joined: May 31, 2001 Posts: 2256 From: Switzerland
| Posted: 2001-11-23 01:34  
well this should help
go to the SETUP of DS
choose the display mode you want
leave with OK !! DONT CANCEL THERE !!
thats all - enjoy
[MoA] Bumblebee
Mercenaries of Andosia
MOD of the cleanest Forum in town
_________________
|
Deleted Cadet
Joined: Posts: 0
| Posted: 2001-11-23 01:51  
Well I allready tried this, and I tried it again just now with the same result :-<
_________________
|
Bumblebee Cadet Mercenaries of Andosia
Joined: May 31, 2001 Posts: 2256 From: Switzerland
| Posted: 2001-11-23 04:55  
thats bad - now:
- do other games/applications run smooth?
Quote:
| It all worked fine with DirectX 8.0 |
|
- does this mean - with the 21.83driver and DX8.0
- was it 8.0 or 8.0a
- who "builded" your Vid-card??
- what Motherboard (VIA or INTEL - chipset)
[MoA] Bumblebee
Mercenaries of Andosia
MOD of the cleanest Forum in town
_________________
|
Deleted Cadet
Joined: Posts: 0
| Posted: 2001-11-23 06:33  
It worked fine with 8.0, 8.0a and 21.83, 21.81
The card is a Creative GeForce 2 Pro
64 MB DDR
My motherboard is VIA-chipset
So DX 8.1 is the only new component
Tony Hawk 2 and Dave Mirra BMX works just fine
The demo AquaNox and DarkSpace doesn't work
And both use DX 8 features (to my knowledge)
refrus
_________________
|
Bumblebee Cadet Mercenaries of Andosia
Joined: May 31, 2001 Posts: 2256 From: Switzerland
| Posted: 2001-11-23 08:44  
next question:
is the latest 4 in 1 installed on the board
[MoA] Bumblebee
Mercenaries of Andosia
MOD of the cleanest Forum in town
_________________
|
Deleted Cadet
Joined: Posts: 0
| Posted: 2001-11-25 16:26  
My hardware ist simular to yours, but I don't have those problems you're complaining about.
I wrote my sys config into my signature
DS also worked fine with the following configs:
- Win2k Sp2, DX 8.0a, Det. 12.41
- Win2k SP2, DX 8.0a, Det. 14.70
- Win2k SP2, DX 8.1, Det. 14.70
I only had problems with Detonator 21.81 (Win2k SP2, DX 8.0a). Using this I got nice crashes with blue screens saying something about nv4_disp.dll
_________________
[eXS]Rabus
--------------------
My system:
AMD Athlon Classic 700
VIA KX-133 (south-) / AMD 751 (northbridge) (latest official drivers)
320 MB RAM
GeForce 2 Ultra (DetonatorXP v21.83)
Win XP
DX 8.1
[ This Message was edited by: Rabus on 2001-11-25 16:27 ]
_________________
|
Bumblebee Cadet Mercenaries of Andosia
Joined: May 31, 2001 Posts: 2256 From: Switzerland
| Posted: 2001-11-26 07:08  
well i updated myself with NO problem
gained a plus of 6% in the 3D-Mark2001-Bench
but my main-OS is still WIN98Se
next try will be my XP - i keep you informed
[MoA] Bumblebee
Mercenaries of Andosia
MOD of the cleanest Forum in town
_________________
|
Deleted Cadet
Joined: Posts: 0
| Posted: 2001-11-26 08:20  
Hi all!
Thanks for all your help. I'm gonna try to reinstall sp2, dx8.1 and nvidia 21.83
Hopefully this will work
refrus
_________________
|
Bumblebee Cadet Mercenaries of Andosia
Joined: May 31, 2001 Posts: 2256 From: Switzerland
| Posted: 2001-11-26 09:00  
i hope it 2
feel free to call for further help
[MoA] Bumblebee
Mercenaries of Andosia
MOD of the cleanest Forum in town
_________________
the light at the end of the tunnel often is only the reflection of your own
[ This Message was edited by: Bumblebee on 2001-11-27 03:59 ]
_________________
|
Deleted Cadet
Joined: Posts: 0
| Posted: 2001-11-29 20:55  
Yes, I also had this problem.
System:
Win 2000 SP2
Pentium III/800 Mhz
512 MB Ram
NVIDIA GeForce 256
DirectX 8.1
Latest Detonator Drivers (21.83)
I had no idea how to fix this, but I tried DirectX Properties in Control panel and I noticed under the Direct3D tab, that 'Allow Hardware Acceleration' was NOT checked. Neither were 'Enumerate Ramp Rasterizer' and 'Enumerate Reference Rasterizer'.
So, I checked all three boxes, ran dxdiag, Tested Direct3D, everything worked fine, then started up DarkSpace and it worked!
Not sure if that is your problem but it's worth a try.
Krung
_________________
|
Deleted Cadet
Joined: Posts: 0
| Posted: 2001-11-30 07:27  
Hi all!
I'm back!
I had to "uninstall" directX and reinstall it. I used "DirectX Buster".
Thanks for all your help and sugestions
refrus
_________________
|
Dwarden Admiral CHIMERA
Joined: June 07, 2001 Posts: 1072 From: Czech Republic
| Posted: 2001-12-03 17:50  
I suggest You to download official released Nvidia Detonators 23.11 ... (pretty stable)
_________________ ... Ideas? ... that's Ocean w/o borders !
|
Deleted Admiral
Joined: Posts: 0
| Posted: 2002-01-15 20:55  
My game wont work with DX8.1, it keep saying run clientsetup, and i did 56 times.
I have:
1000mhz
256ram
Voodoo 5500
and it worked fine befor i installed DX8.1
_________________
|
Deleted Admiral
Joined: Posts: 0
| Posted: 2002-01-15 21:33  
I got it to work.
If you want to now how look for me.
_________________
|