| Author |
new lasers |
Admiral Valeor Tackle
Admiral
Joined: February 26, 2012
Posts: 106
|  Posted: 2013-05-18 06:51
I think we should have a new laser, shaped almost like a tear drop because the current one looks wierd. It is like some kind of luminous balls.
 .
So what do you think 
_________________
Pleasse do not cry
|
Kenny_Naboo
Marshal
Pitch Black
Joined: January 11, 2010
Posts: 3823
From: LobsterTown
| Posted: 2013-05-18 06:54
lolwut?
_________________
... in space, no one can hear you scream.....
|
Borgie
Chief Marshal
Pitch Black
Joined: August 15, 2005
Posts: 2256
From: close by
| Posted: 2013-05-18 08:08
Quote:
On 2013-05-18 06:54, Kenny_Naboo wrote:
lolwut?
|
really??
_________________
|
PsyCrow
Admiral
Joined: June 21, 2012
Posts: 56
| Posted: 2013-05-18 12:21
I think he means something like this?
1st one is the proposal, 2nd one is the current design.
Or maybe he means for a tear drop to only apply at the very start of the beam and then extend as usual.
[ This Message was edited by: PsyCrow on 2013-05-18 12:22 ]
_________________
|
-DBS
Marshal
Joined: January 04, 2011
Posts: 204
From: St. Petersburg, FL
| Posted: 2013-05-20 12:06
Quote:
On 2013-05-18 12:21, PsyCrow wrote:
I think he means something like this?
1st one is the proposal, 2nd one is the current design.
Or maybe he means for a tear drop to only apply at the very start of the beam and then extend as usual.
[ This Message was edited by: -DBS on 2013-05-20 12:08 ]
|
I have a 2W 445nm laser and it when focused starts wide and ends needle tip sized on target. But, the reflections and scatter light still give off a star around the end point. So, real life it looks like both images... But, in space there isnt all those air particles so you wouldnt even see the beam...
-Shane
_________________
|
darkemotion
1st Rear Admiral
Joined: May 19, 2013
Posts: 4
| Posted: 2013-05-20 12:41
a kitty in top right corner so cute
_________________
|
Kenny_Naboo
Marshal
Pitch Black
Joined: January 11, 2010
Posts: 3823
From: LobsterTown
| Posted: 2013-05-21 00:08
Quote:
On 2013-05-18 12:21, PsyCrow wrote:
I think he means something like this?
1st one is the proposal, 2nd one is the current design.
Or maybe he means for a tear drop to only apply at the very start of the beam and then extend as usual.
[ This Message was edited by: PsyCrow on 2013-05-18 12:22 ]
|
Makes no sense for a beam to be teardrop shaped...
It is what it is.
_________________
... in space, no one can hear you scream.....
|
-DBS
Marshal
Joined: January 04, 2011
Posts: 204
From: St. Petersburg, FL
| Posted: 2013-05-21 00:39
Quote:
On 2013-05-21 00:08, Kenny_Naboo wrote:
Quote:
On 2013-05-18 12:21, PsyCrow wrote:
I think he means something like this?
1st one is the proposal, 2nd one is the current design.
Or maybe he means for a tear drop to only apply at the very start of the beam and then extend as usual.
[ This Message was edited by: -DBS on 2013-05-21 00:44 ]
|
Makes no sense for a beam to be teardrop shaped...
It is what it is.
|
Maybe this is what he means, unless he watches too much Anime 
_________________
|
Kenny_Naboo
Marshal
Pitch Black
Joined: January 11, 2010
Posts: 3823
From: LobsterTown
| Posted: 2013-05-21 01:43
Is that a Spyder 3 Blue Arctic?
_________________
... in space, no one can hear you scream.....
|
-DBS
Marshal
Joined: January 04, 2011
Posts: 204
From: St. Petersburg, FL
| Posted: 2013-05-21 23:07
Quote:
On 2013-05-21 01:43, Kenny_Naboo wrote:
Is that a Spyder 3 Blue Arctic?
|
Hell no... It has a custom current limiting driver and milled heatsink in an Aurora sh-032 flashlight stainless steel host with a 95% pass through focus lens with a custom focus adapter, running on an 18650 Li-Ion battery with 3400mAh. The forward voltage is 3.6-4.2 and the current is set at 1.78 amps. The diode is from a Ka$1o Laser projector and so is the 9mm stock lens. This thing can burn an Arctic from WL...
I made the Phaser for my Father in Law also and it has a complete sound board for effects...
http://youtu.be/a0AD5kJ6Wm0
[ This Message was edited by: -DBS on 2013-05-21 23:24 ]
_________________
|
Kenny_Naboo
Marshal
Pitch Black
Joined: January 11, 2010
Posts: 3823
From: LobsterTown
| Posted: 2013-05-22 01:28
Quote:
On 2013-05-21 23:07, -DBS wrote:
Hell no... It has a custom current limiting driver and milled heatsink in an Aurora sh-032 flashlight stainless steel host with a 95% pass through focus lens with a custom focus adapter, running on an 18650 Li-Ion battery with 3400mAh. The forward voltage is 3.6-4.2 and the current is set at 1.78 amps. The diode is from a Ka$1o Laser projector and so is the 9mm stock lens. This thing can burn an Arctic from WL...
I made the Phaser for my Father in Law also and it has a complete sound board for effects...
http://youtu.be/a0AD5kJ6Wm0
[ This Message was edited by: -DBS on 2013-05-21 23:24 ]
|
Nice... custom made. You've gotta teach me how to make something like that with parts that can be cannibalized off consumer available products!
I've always wanted to make myself a 5W laser.
_________________
... in space, no one can hear you scream.....
|
Pantheon
Marshal
Palestar
Joined: May 29, 2001
Posts: 1789
| Posted: 2013-05-22 07:59
Lets not advertise the creation of 18+ gadgets that can seriously damage eyes and skin please.
_________________
|
Kenny_Naboo
Marshal
Pitch Black
Joined: January 11, 2010
Posts: 3823
From: LobsterTown
| Posted: 2013-05-22 08:59
Quote:
On 2013-05-22 07:59, Pantheon wrote:
Lets not advertise the creation of 18+ gadgets that can seriously damage eyes and skin please.
|
My bad. Agreed.
PM me pls, -DBS!
_________________
... in space, no one can hear you scream.....
|
Admiral Valeor Tackle
Admiral
Joined: February 26, 2012
Posts: 106
| Posted: 2013-05-24 12:15
The 1st one is better
_________________
Pleasse do not cry
|
Kenny_Naboo
Marshal
Pitch Black
Joined: January 11, 2010
Posts: 3823
From: LobsterTown
| Posted: 2013-05-24 21:54
The first one looks like a particle cannon bolt.
_________________
... in space, no one can hear you scream.....
|
English
Deutsch
Nederlands
)
