Author |
UGTO SV-series Dreadnought (WIP) |
YIIMM Grand Admiral
Joined: June 16, 2005 Posts: 851 From: Barcino, Hispania Tarraconensis
| Posted: 2010-07-28 21:12  
I've really enjoyed following LoA's thread and seeing the designs he's been putting together and it inspired me to get back into modelling (I'm jumping on a bit of a bandwagon here, I'm under no illusions about that).
I also decided to try and learn Blender (for perhaps the 3rd or 4th time) and I'm happy to say that, over the course of this week, it's finally stuck.
I've been having a go, yet again, at designing a new UGTO dread. The model that's taking shape seems to be a cross between a sleeker design and a higher poly version of the existing one.
I started off with a head section modeled slightly after a Firefly, but in the end it came out as a cross between a Y-wing and Valkyrie.
Next step is to add some more structures on the hull, including engines before texturing. I'm not intending this to be a game model (without subdivision, the finished ship might be within the poly limit, but it's still a tad inefficient).
C&C welcome
[ This Message was edited by: YIIMM on 2010-08-15 06:14 ]
_________________
|
Lark of Serenity Grand Admiral Raven Warriors
Joined: June 02, 2002 Posts: 2516
| Posted: 2010-07-28 21:49  
suggestions for add ons: following the current EAD model, two large arms coming off the top of the bottom, running from the midsection to the back. the top one can continue the angle of the rear section, the bottom one should perhaps be counter to it creating a V shape.
the bottom looks a little flat. maybe in addition to the spar, add a tower like on the agincourt? [ This Message was edited by: Lark of Serenity on 2010-07-28 21:50 ]
_________________ Admiral Larky, The Wolf
Don't play with fire, play with Larky.
Raven Division Command - 1st Division
|
Shigernafy Admiral
Joined: May 29, 2001 Posts: 5726 From: The Land of Taxation without Representation
| Posted: 2010-07-29 06:38  
I want a dread that looks like this:
_________________ * [S.W]AdmBito @55321 Sent \"I dunno; the French had a few missteps. But they're on the right track, one headbutt at a time.\"
|
nicklane1 2nd Rear Admiral
Joined: October 03, 2009 Posts: 112 From: Eating your cheese behind you.
| Posted: 2010-07-29 06:50  
I reallly dont like the current UGTO dreadnaught models, their all the same except the agincourt, and it looks awesome, so my suggestion is go for something similar to the agincourt
_________________ Hey guys i hope you dont like cheese, cuz ima eatin al urz chaezeyZ
|
YIIMM Grand Admiral
Joined: June 16, 2005 Posts: 851 From: Barcino, Hispania Tarraconensis
| Posted: 2010-07-29 09:10  
Quote:
|
On 2010-07-29 06:38, Shigernafy wrote:
I want a dread that looks like this:
|
|
When I'm done I might make it a bit toothier
Replaced the placeholder hangar bay and pulled down the "wings" a bit more. I've started playing around with some engine configurations. I'm quite like look of the current setup but might end up either making the top engine larger or adding an addition structure to the top aft.
_________________
|
Vice Admiral Onassi Vice Admiral
Joined: March 20, 2010 Posts: 44 From: Bridge of the Hot Needle of Inquiry
| Posted: 2010-07-29 12:39  
Quote:
|
On 2010-07-29 06:38, Shigernafy wrote:
I want a dread that looks like this:
|
|
Dont we already have that?
_________________ Well, Theres only two kinds of stuff.. The stuff that kills stuff, and the stuff that get killed.
|
Veronw Marshal
Joined: December 13, 2004 Posts: 554
| Posted: 2010-07-29 13:51  
Definitely very smooth and BSGish, looks like you modeled it quite well and the topology looks flawless. I am not a fan of the way it looks top down though, it makes it feel more.. Kluth in a way. Are you planning to add further detailing with the hull? or is that the final shape?
_________________
|
Pegasus Grand Admiral Pitch Black
Joined: August 02, 2005 Posts: 434 From: Eleventh galaxy on the right!
| Posted: 2010-07-29 13:57  
Looks very nice Yimm.
_________________ Retired K'luth Combateer
|
Sardaukar Admiral Raven Warriors
Joined: October 08, 2002 Posts: 1656
| Posted: 2010-07-29 15:03  
Looks nice, and have you ever played X3? More than the cited sources, this is channeling the Boron Shark.
[ This Message was edited by: Sardaukar on 2010-07-29 15:04 ]
_________________
|
Matthias_L Fleet Admiral Courageous Elite Commandos
Joined: June 06, 2007 Posts: 2
| Posted: 2010-07-29 16:34  
I'm not sure if there is any intention to have this in game, but I'm getting the suspicion that it is too high poly. Are you using the subsurf modifier?
The in game UGTO dreads can't have much more than 300 tri's. Though its difficult to tell because they're a little messy with the overlapping parts and z-fighting. (or is that my computer?)
I definitely like what you made, but I'm just afraid of how many triangles it has.
EDIT: just looked at the in game model, I might be off a bit. [ This Message was edited by: Matthias_L on 2010-07-29 16:42 ]
_________________
|
YIIMM Grand Admiral
Joined: June 16, 2005 Posts: 851 From: Barcino, Hispania Tarraconensis
| Posted: 2010-07-29 22:14  
Quote:
|
On 2010-07-29 13:51, Veronw wrote:
Definitely very smooth and BSGish, looks like you modeled it quite well and the topology looks flawless. I am not a fan of the way it looks top down though, it makes it feel more.. Kluth in a way. Are you planning to add further detailing with the hull? or is that the final shape?
|
|
Personally, I find that UGTO and K'luth ships, at a basic level, have very similar forms (obviously embellishments and textures are different) so I'm not too worried if it resembles a K'luth ship slightly. The planform shape is primarily based on the existing UGTO dread.
What I've got at the moment is purely just the basic hull shape, I'm still planning to add more structures to it. Once I've got all that done then I'll start attempting to add detail; Blender doesn't seem to do inset detailing all that well though, so I'll see how that goes.
Quote:
|
On 2010-07-29 15:03, Sardaukar wrote:
Looks nice, and have you ever played X3? More than the cited sources, this is channeling the Boron Shark.
|
|
Fraid not, haven't played a space sim since X-wing Alliance
Quote:
|
On 2010-07-29 16:34, Matthias_L wrote:
I'm not sure if there is any intention to have this in game, but I'm getting the suspicion that it is too high poly. Are you using the subsurf modifier?
|
|
No, as I said, I'm not modelling this with the intent for it to be a game model. Without any subdivision, though, the current poly count is about 2k (dreads are recommended to be around 3k), the only thing is I'm not sure if by 3k they mean tris or if n-gons can be included.
I might well make a version of this model suitable for in-game use, if I feel tempted, but if I did I'd probably make it from scratch.
Just been cleaning up the rear hull and redoing the engine structures.
[ This Message was edited by: YIIMM on 2010-07-29 22:15 ]
_________________
|
The_Enforcer (The Vindicator) Fleet Admiral
Joined: March 05, 2010 Posts: 163 From: another dimension
| Posted: 2010-07-29 22:25  
we really should have a diffrent hull type of dread since they are all the same, this should be a good command dread hull design
_________________ Problem Darkspace?
|
Kenny_Naboo Marshal Pitch Black
Joined: January 11, 2010 Posts: 3823 From: LobsterTown
| Posted: 2010-07-30 00:26  
Not a bad design YIMM.
Can we see the wireframe or edged-face views for this?
I like to study how people go about getting their desired shapes.
[ This Message was edited by: Kenny_Naboo on 2010-07-30 00:27 ]
_________________ ... in space, no one can hear you scream.....
|
YIIMM Grand Admiral
Joined: June 16, 2005 Posts: 851 From: Barcino, Hispania Tarraconensis
| Posted: 2010-07-30 07:06  
Sure
_________________
|
YIIMM Grand Admiral
Joined: June 16, 2005 Posts: 851 From: Barcino, Hispania Tarraconensis
| Posted: 2010-07-30 13:30  
The rear hull had some errors in the way I'd closed it up, resulting in some unwanted crinkling, so I've had a go at redoing that. Also remodeled the lower engines and added a kind of cowling (I'd call it an intake, but that doesn't make very much sense).
[ This Message was edited by: YIIMM on 2010-07-30 13:31 ]
_________________
|